How to calibrate the horizontal plug-in and pull-out force tester?

The calibration of the horizontal plug-in and pull-out force tester requires the following steps: 1. Prepare a standard dynamometer: Install the standard dynamometer on the plug-in and pull-out force testing machine to ensure that the installation is firm and stable.2. Adjust the zero position: adjust the dynamometer to the zero position to ensure the accuracy and stability of the dynamometer. 3. Test sample: Place the sample to be tested on the test bench of the plug-in and pull-out force tester to ensure that the sample is placed smoothly and firmly. 4. Set the test parameters: according to the requirements of the test sample, set the test parameters of the plug-in and pull-out force tester, such as plug-in speed, number of plug-in and pull-out times, etc. 5. Start the test: According to the set test parameters, start the plug-in and pull-out force tester for testing. 6. Record the test results: record the results of each test, including the plug-in and pull-out force value, the number of plug-in and unplugs, etc. 7. Analyze the test results: According to the recorded test results, analyze the accuracy and stability of the test data. If the error is found to be large, it needs to be adjusted. The above is the basis of the horizontal plug-in and pull-out force test machine.In this calibration step, it should be noted that in the process of calibration and use, the relevant operating specifications and safety requirements should be followed to ensure the normal operation and personal safety of the equipment.