How to debug the wire harness tester?

The wire harness tester is a device used to test the performance of the wire harness. The following are the steps to debug the harness tester: 1. Check the connection of the tester: First of all, make sure that the tester is firmly connected to the wire harness. If the connection is not correct, the test results may be incorrect or inaccurate. 2. Confirm test parameters: Before starting the test, you need to confirm the test parameters, such as test speed, pressure, etc. These parameters need to be adjusted according to the specific requirements of the wire harness. 3. Conduct an initial test: Before starting the test, an initial test is required to ensure the accuracy of the test machine. 4. Test: During the test, it is necessary to ensure that the surface of the wire bundle is flat and there is no bulge or depression. If the surface of the wire bundle is uneven, the test results may be incorrect or inaccurate.5. Confirm the test results: After the test is completed, you need to confirm whether the test results meet the standard requirements. If the test results do not meet the standard requirements, they need to be adjusted and tested again. In a word, debugging the harness tester needs to carefully check the connection of the tester, confirm the test parameters, conduct the initial test, test and confirm the test results.