How to install the high and low temperature chamber?

The high and low temperature chamber is a kind of equipment used to test the performance of products or materials under high, low temperature and constant temperature conditions. The following are the installation steps of the high and low temperature chamber laboratory: 1. Preparation: Before installing the high and low temperature chamber laboratory, you need to prepare the following tools and materials: installation instructions, electric drill, screwdriver, flat-head screws, conical screws, sealant, insulating tape, etc. 2. Install the bottom frame: Install the bottom frame on the ground according to the requirements of the installation instructions.The bottom frame should be horizontal, stable, and keep a certain distance from the wall for ventilation. 3. Install the box: Place the box on the bottom frame and fix it with screws according to the instructions. Pay attention to keep the seal between the box and the bottom frame to prevent temperature loss. 4. Install the temperature controller: Install the temperature controller on the box and wire it according to the requirements of the manual. 5. After installation, a test is required. First, check whether the power supply is safe, then set the required high temperature, low temperature and constant temperature values, and conduct experiments. It should be noted that during the installation process, the ground should be kept dry and avoid direct sunlight. At the same time, it should be ensured that the temperature controller works normally to avoid damage to the equipment due to uncontrolled temperature.