How to operate the cycle mode of the programmable constant temperature and humidity test chamber?

The cycle mode operation method of the programmable constant temperature and humidity test chamber may vary depending on the brand and model. Generally speaking, the following are the common operation steps: 1. Turn on the power switch of the device and make sure that the device is working normally. 2. Press the "Settings" button to enter the setting mode. 3. Select the "Circulation Mode" option and set the required temperature and humidity conditions.4. Set the running time of the loop mode, for example, starting at 8 a.m., lasting for 2 hours, and then stopping. 5. Press the "Start" button to start the loop mode. 6. During the cycle mode operation, you can monitor the temperature and humidity readings of the device and adjust them as needed. 7. After the end of the loop mode, the device will automatically stop running and display the running results. Please note that the above steps are for reference only, and the specific operation may vary depending on the brand and model. It is recommended to read the equipment manual carefully before using the equipment to ensure the correct operation of the equipment.