How to repair the push-pull force tester?

Push-pull force tester is a physical test device used to measure thrust and tensile force. If the push-pull force tester fails, here are some possible repair steps: 1. Check the power supply and wires of the tester: First, make sure that the power supply and wires of the tester are properly connected. If the tester is not connected to the power supply or the wire is broken, the tester will not work properly. 2. Check the sensor of the tester: The sensor is a key component of the tester and is responsible for measuring the thrust or tensile force. If the sensor fails, the tester will not be able to accurately measure the size of the force. Check whether the sensor is damaged or loose. If necessary, please replace the sensor. 3. Check the display of the tester: The display of the tester is used to display the measured force value. If the monitor does not light up or an error code appears, check whether the cable of the monitor is well connected, or try to replace the monitor.4. Calibration tester: If the tester measurement is not accurate, it needs to be calibrated. The calibration process can refer to the tester's user manual or contact the manufacturer for guidance. 5. Clean the tester: If the tester uses a lot of dust, it may cause the mechanical parts of the tester to be stuck or inflexible. Regular cleaning of the mechanical parts of the tester can keep it in good working condition. If the above steps do not resolve the issue, it is recommended to send the tester back to the manufacturer or professional repair facility for more in-depth repair.