How to use the battery squeezing test machine?

The battery squeeze test machine is a device used to test the performance of the battery under external pressure. The following are the general steps for using the battery extrusion test machine: 1. Prepare the battery: Select the battery to be tested to make sure that it is not damaged and meets the test requirements. 2. Set the parameters of the testing machine: according to the test requirements, set the extrusion speed, extrusion force, extrusion area and other parameters of the testing machine. 3. Place the battery in the testing machine: Place the battery between the squeezing plate of the testing machine to ensure that the position of the battery is correct and not pinched by the squeezing plate. 4. Start the test: start the test machine and start the squeeze test of the battery. 5. Observe the test results: During the test, observe the reaction and changes of the battery, such as whether the battery has smoke, explosion, fire and other phenomena.At the same time, record the data during the test process, such as squeezing force, squeezing speed, etc. 6. Analyze the test results: According to the test results, analyze the performance of the battery under external force squeezing, and judge whether the battery meets the requirements. It should be noted that when using the battery squeeze test machine, the relevant operating procedures and safety regulations should be followed to ensure the safety of personnel and equipment. At the same time, for different types of batteries, their test methods and requirements may also be different, and they need to be adjusted and adapted according to the specific situation.