How to use the helmet impact tester?

The helmet impact testing machine is a device used to test the impact resistance of helmets. The following are the general steps to use the helmet impact testing machine: 1. Prepare the helmet: select the helmet to be tested, make sure that it meets the test requirements, and clean the surface of the helmet to avoid the influence of external factors on the test results. 2. Set the test machine: Set the impact hammer quality and impact height of the impact test machine according to the specifications and test requirements of the helmet. These parameters should be set according to the standard specifications. 3. FirmFix the helmet: Place the helmet on the fixing device of the impact test machine to ensure that the helmet position is correct and stable, and avoid sliding or rotation during the test. 4. Perform impact: Press the test button, and the impact test opportunity will automatically drop the impact hammer and impact the helmet. After each impact, record the impact force and damage to the helmet. 5. Analysis results: Evaluate the impact resistance of the helmet according to the test results. Judge whether the helmet meets the requirements according to the set standards and specifications. It should be noted that the relevant operating procedures and safety requirements should be followed when using the helmet impact testing machine. Before testing, you should read the equipment manual carefully and make sure that you have a full understanding of the operation process and safety precautions. At the same time, appropriate test methods and equipment should be selected to ensure the accuracy and reliability of the test results.