How to use the video of the pull machine?

Tiling machine is an experimental equipment used to test the mechanical properties of materials, parts or finished products. Generally, it can be divided into several types such as electronic tensile machine, hydraulic tensile machine, pneumatic tensile machine and so on.When using the pull machine, you need to follow the following steps: 1. Preparation: Prepare the material samples that need to be tested according to the specified size, and install suitable fixtures according to the test needs, and adjust the test parameters, such as test speed, test force, test stroke, etc. 2. Connect the device: Connect the pull machine to the computer or monitor, and ensure that the power supply is stable and safe. 3. Start the device: turn on the power of the pull machine, start the computer or monitor, and open the corresponding test software. 4. Test process: Place the sample on the test bench of the tensile machine and start the test. During the testing process, it is necessary to pay attention to the changes in the test data at all times. If there is an abnormal situation, the test should be stopped immediately. 5. Data processing: After the test is completed, the test data is exported to the computer or monitor for data processing and analysis.Generate test reports as needed, and save relevant data and files. It should be noted that when using the tensile machine, it is necessary to strictly follow the instructions in the operating instructions to ensure the safety and reliability of the equipment. At the same time, in order to obtain accurate test results, appropriate test methods and samples should be selected, and strict test conditions should be controlled. In addition, you should pay attention to the following points during the use of the pull machine: 1. Regularly check and maintain the equipment to ensure the normal operation and accuracy of the equipment. 2. Strictly control the test environment, such as temperature, humidity and other parameters, to avoid the influence of the environment on the test results. 3. Keep the equipment clean and hygienic, and avoid the contamination or damage of the equipment by samples or fixtures. 4. Back up test data and files regularly to prevent data loss or damage.5. During the testing process, appropriate protective equipment, such as gloves, glasses, etc., should be worn to ensure safe operation. In general, the correct use of the tensile machine requires strict compliance with the operating procedures, pay attention to the safety and maintenance of equipment, and strictly control the test environment and samples to ensure accurate test results and reliable experimental reports.