How to use the video of the push-pull force tester?

Push-pull force tester is a device used to test the mechanical properties of materials, which can measure the tensile strength, compression strength, tear strength, etc. of objects. The following are the basic steps to use the push-pull force tester: 1. Prepare samples: Prepare samples of a certain shape and size according to the nature and test requirements of the tested material. 2. Adjust the test machine: adjust the upper and lower fixtures, test speed, test distance and other parameters of the test machine according to the test requirements. 3. Install the sample: Place the prepared sample between the upper and lower fixtures of the testing machine to ensure that the sample is parallel to the fixture and does not slide or twist. 4. Start the test: start the test machine and record the force and displacement data during the test.5. Analyze data: Import the data obtained from the test into the computer, and use relevant mechanical analysis software to calculate the mechanical properties of the material, such as tensile strength, compressive strength, tear strength, etc. It should be noted that when using the push-pull force tester, it should be operated according to the instructions of the equipment, and should not exceed the maximum load of the tester, so as not to damage the equipment or cause safety hazards. At the same time, for different materials and test requirements, it is necessary to select appropriate test methods and parameters for testing.